⚠️ Before You Order a Control Board — Check the FULL Model Number
If you own a Maytag MFI2067AES refrigerator and need a new main control board, be careful.
Searching only:
MFI2067AES
can bring up a control board that may not be correct for your refrigerator.
We recently ran into this exact situation while working on a Maytag refrigerator in the Atlanta area.
🔎 Quick Reference for This Refrigerator
Brand: Maytag
Model Family: MFI2067AES
Correct Model Variation: MFI2067AES12
Programming Code: 1311 This code should be on the model tag, it may be different for your Model
Correct Main / High Voltage Control Board: WPW10310240
Also Seen As: W10310240
❌ Do Not Automatically Use:
W10890094
For this particular MFI2067AES12, that is not the board we would install.
Why Is This So Confusing?
When you search online for:
“Maytag MFI2067AES main control board”
you may see:
W10890094
At first glance, it looks correct.
Some parts catalogs associate that board with refrigerators in the MFI2067AES family.
But there is an important detail:
➜ The numbers after MFI2067AES matter.
For this refrigerator, the correct complete variation is:
MFI2067AES12
And once the refrigerator is identified as MFI2067AES12, the control board changes.
✅ Correct Board: WPW10310240
For the MFI2067AES12, the main electronic / high-voltage control board we identified is:
WPW10310240
You may also see it listed as:
W10310240
This is why we always recommend checking the complete model information and serial number before ordering an electronic control board.
Why the Serial Number Matters
With some Maytag refrigerators, the basic model number doesn’t tell the whole story.
The serial information can help identify the correct production or model variation.
In this case, the refrigerator had to be treated as:
MFI2067AES12
—not simply MFI2067AES.
That small difference can completely change which control board belongs in the refrigerator.
💻 Programming Code: 1311 This code should be on the model tag, it may be different for your Model
The model tag also showed:
CODE 1311 This code should be on the model tag, it may be different for your Model
This is another important piece of information when dealing with refrigerator electronics.
Replacing a control board isn’t always as simple as:
Remove old board → plug in new board → done.
Electronic controls may need to match the refrigerator’s specific configuration and programming.
A board can:
- Look almost identical
- Have similar connectors
- Physically fit
- Still be wrong for the refrigerator
⚠️ What Can Happen If the Wrong Board Is Installed?
Using an incorrect control board can create very confusing problems.
You may see symptoms such as:
❌ Refrigerator will not accept the programming code
❌ Ice maker stops working
❌ Ice dispenser behaves strangely
❌ Display or control-panel problems
❌ Compressor doesn’t operate correctly
❌ Fans don’t operate as expected
❌ Some refrigerator functions work while others do not
That can easily make it look like the refrigerator has several different failures when the real issue is simply the wrong electronic control.
Don’t Order an Appliance Board Just Because It Looks the Same
This is especially important with modern appliance electronics.
Two boards can look almost identical and still have:
- Different programming
- Different software
- Different appliance compatibility
- Different superseded part numbers
That is why matching a board based only on appearance is risky.
✅ What We Check Before Ordering a Refrigerator Control Board
Before ordering an expensive electronic control, we recommend checking all of the following:
1️⃣ Complete Model Number
Don’t stop at:
MFI2067AES
Look for the entire model variation.
2️⃣ Serial Number
The serial number can help determine the correct production version of the appliance.
3️⃣ Programming Code
For this refrigerator:
CODE 1311 This code should be on the model tag, it may be different for your Model
4️⃣ Original Control Board Number
Whenever possible, compare the number printed on the original control.
5️⃣ Manufacturer Parts Breakdown
The parts lookup should be performed using the exact appliance variation, not just the general model family.
💡 Why This Matters
Electronic appliance parts can be expensive.
They may also have stricter return policies than regular mechanical parts.
Ordering the wrong board can mean:
- Losing money on a non-returnable part
- Additional service visits
- More refrigerator downtime
- Incorrect diagnosis
- Replacing parts that were never actually bad
A few extra minutes spent identifying the appliance correctly can prevent all of that.
🔧 Maytag Refrigerator Repair in Atlanta, GA
At Atlanta City Appliance Repair, we diagnose and repair Maytag refrigerators throughout Atlanta and the surrounding area.
We commonly work on:
✅ Refrigerator not cooling
✅ Freezer not freezing
✅ Main control board problems
✅ Ice maker problems
✅ Display and user-interface problems
✅ Evaporator fan problems
✅ Condenser fan problems
✅ Defrost system failures
✅ Water dispenser problems
✅ Temperature-control issues
✅ Electrical problems
✅ Refrigerator control-board failures
📌 Maytag MFI2067AES12 Parts Quick Reference
Refrigerator
Maytag MFI2067AES12
Programming Code
1311 This code should be on the model tag, it may be different for your Model
Main / High Voltage Control Board
WPW10310240
Alternate Number
W10310240
Board We Would NOT Automatically Substitute
W10890094
Final Takeaway
If you have a Maytag MFI2067AES refrigerator, don’t order a main control board using only the basic model number.
MFI2067AES ≠ MFI2067AES12 when it comes to parts identification.
The full model variation, serial number, programming code, and original control-board information should all be checked before ordering.
For the refrigerator discussed in this repair case:
✅ Model: MFI2067AES12
✅ Code: 1311 This code should be on the model tag, it may be different for your Model
✅ Correct Main Control Board: WPW10310240
That one small “12” can make the difference between ordering the right board and an expensive wrong one.
Need Maytag Refrigerator Repair in Atlanta?
Atlanta City Appliance Repair provides refrigerator repair throughout Atlanta, Roswell, Alpharetta, Marietta, Sandy Springs, Dunwoody, Buckhead, Brookhaven, Johns Creek, and surrounding North Atlanta areas.
If your Maytag refrigerator isn’t cooling, is showing control problems, or you aren’t sure which control board it needs, proper diagnosis and exact model verification should come before replacing parts. For parts search you can use AppliancePartsDealer.
